How do I connect a Dynaudio Music speaker to Wi-Fi without the Dynaudio Music App?

First make sure that your speaker is in Wi-Fi setup mode. Wi-Fi setup mode is indicated by preset 1 & 2 flashing on Music 1 & 3 and button 1 flashing on Music 5 & 7. See here how to enter Wi-Fi setup mode.

iOS

  1. Enter setup mode on your Dynaudio Music speaker by pressing and holding preset button 1 (Wi-Fi) on Music 5 and 7 or press and hold the setup button on Music 1 and 3.
  2. Open “Settings -> Wi-Fi” on your iOS device and find the Dynaudio Music speaker near the bottom of the screen ready for setup. Select the Dynaudio Music speaker.
  3. After selecting the speaker, you can assign an Airplay password for your speaker. Not mandatory.
  4. Select “Next” in upper right corner and speaker connect to Wi-Fi

 

Android

  1. Enter setup mode on your Dynaudio Music speaker by pressing and holding preset button 1 (Wi-Fi) on Music 5 and 7 or press and hold the setup button on Music 1 and 3.
  2. Open “Settings -> Wi-Fi” on your Android device and find the Dynaudio Wi-Fi on the list of available Wi-Fi networks.
  3. Select the Dynaudio Wi-Fi and wait for it to successfully connect.
    • Some Android devices take longer to connect to a Wi-Fi that’s unsecured and/or lacks an actual internet connection. In some cases, it’s necessary to active flight mode and Wi-Fi to prevent the device to use cellular data due to the lack of an actual internet connection.
  4. Open a browser on the device and enter 192.168.1.1 in the address field. The address field is where you normally enter a web page.
  5. Now you should see the web interface of the speaker. Press the “Menu” icon in the upper right corner and select “Setup” in the drop-down menu.
  6. On the Setup page, you can rename your speaker, select a Wi-Fi, enter the password and select “Apply Settings” near the bottom of the screen to connect.

 

Windows PC

  1. Enter setup mode on your Dynaudio Music speaker by pressing and holding preset button 1 (Wi-Fi) on Music 5 and 7 or press and hold the setup button on Music 1 and 3.
  2. Open the Wi-Fi menu by selecting the Wi-Fi symbol on the taskbar in the lower right corner.
  3. Select the Dynaudio Wi-Fi and wait for it to successfully connect.
  4. Open a browser on the PC and enter 192.168.1.1 in the address field. The address field is where you normally enter a web page.
  5. Now you should see the web interface of the speaker. Select “Setup” in the top menu line.
  6. On the Setup page, you can rename your speaker, select a Wi-Fi, enter the password and select “Apply Settings” near the bottom of the screen to connect.

 

Mac

  1. Enter setup mode on your Dynaudio Music speaker by pressing and holding preset button 1 (Wi-Fi) on Music 5 and 7 or press and hold the setup button on Music 1 and 3.
  2. On your Mac, select the Wi-Fi icon on the top menu bar.
  3. On the Wi-Fi drop-down menu, the speaker will show up under “New AirPlay Speaker”. Select the speaker.
  4. AirPort Utility will open where you can rename your speaker and assign an optional AirPlay password.
  5. Select “Next" to connect.

 

Other

  1. Enter setup mode on your Dynaudio Music speaker by pressing and holding preset button 1 (Wi-Fi) on Music 5 and 7 or press and hold the setup button on Music 1 and 3.
  2. Open “Settings -> Wi-Fi” on your device and find the Dynaudio Wi-Fi on the list of available Wi-Fi networks.
  3. Select the Dynaudio Wi-Fi and wait for it to successfully connect.
  4. Open a browser on the device and enter 192.168.1.1 in the address field. The address field is where you normally enter a web page.
  5. Now you should see the web interface of the speaker.
    • On phone/tablet: Press the “Menu” icon in the upper right corner and select “Setup” in the drop-down menu.
    • On computer: Select “Setup” in the top menu line.
  6. On the Setup page, you can rename your speaker, select a Wi-Fi, enter the password and select ‘Apply Settings’ near the bottom of the screen to connect.
Have more questions? Submit a request